Plastic Melt Flow Tester Plastic Melting Point Tester
- Model
- HUD-R804
Item specifics
- Name
- 450°C Melt Flow Tester
- Temperature range
- Room temperature～450°C
- Testing range
- 0.1-300.00g/10min (MFR); 0.1-800.00 cm3/10min(MVR)
- Temperature fluctuation
- ±0.2°C
- Time setting
- 0.1~999.9min
- Power
- 1 phase, AC220V, 50Hz
Review
Description
APPLICATION
Melt Flow Index Tester is used to test the flowability of thermoplastic polymer under high temperature, such as polyethylene, polypropylene, pom, ABS resin, polycarbonate, nylon fluorine and other plastic polymers. The automatic temperature control methods of the machine three kinds of blanking ways, manual, timing and automatic control according to operation method, which can realize melt-mass flow rate (MFR) and melt-volume flow rate (MVR) two test methods.
TEST STANDARD
ASTM-D1238, ISO 1133
FEATURES
Temperature range | Room temperature～450°C |
Testing range | 0.1-300.00g/10min (MFR); 0.1-800.00 cm3/10min(MVR) |
Temperature fluctuation | ±0.2°C |
Time resolution | 0.1s |
Displacement accuracy | 0.01mm |
Load | 325g, 1200g, 2160g, 3800g, 5000g, 7160g, 10000g, 21600g |
Material cutting method | Manual, timing and automatic cutting (optional) |
Time setting | 0.1~999.9min |
Cylinder | Diameter 9.5504±0.0076mm |
Land of piston | Diameter 9.4742±0.0076mm, length: 6.35±0.13mm |
Thin hole pattern | External diameter: 9.5±0.02mm; bore diameter 2.0955±0.0051mm; length 8.00±0.025mm |
Weight | 42kg (not including the weights) |
Output result | Micro printer |
Power | 1 phase, AC220V, 50Hz |
