Izod And Charpy Impact Tester Charpy Izod Plastic Impact Strength Test Machine
- Model
- HUD-R802-1
Item specifics
- Name
- PLASTIC CHARY & IZOD IMPACT TESTER
- Pre-elevation angle
- 150°
- Impact velocity
- 3.5m/s
- Pendulum center distance
- 335mm
- Blade filleted radius
- R=0.8±0.2mm
- Impact blade to upper surface distance of the jaw
- 22mm±0.05mm
Review
Description
Application
This instrument is a new type of multi-functional Charpy and Izod integrated impact testing machine. It does not need to disassemble the fixture and sample holder. Two test methods are automatically switched. It is easy to use, simple to operate and high in test accuracy. It is mainly used for the determination of the impact toughness of non-metallic materials such as rigid thermoplastic molding and extrusion materials, hard thermosetting molding materials and fiber-reinforced thermosetting and thermoplastic composites
Test standards
ISO 180: Plastics -- Determination of Izod impact strength
ISO 179: Plastics -- Determination of Charpy impact
ASTM D256: Determining the Izod Pendulum Impact Resistance of Plastics
Specification
Izod Impact Test | Capacity | 2.75J,5.5J |
Pre-elevation angle | 150° | |
Impact velocity | 3.5m/s | |
Pendulum center distance | 335mm | |
Blade filleted radius | R=0.8±0.2mm | |
Impact blade to upper surface distance of the jaw | 22mm±0.05mm | |
Center sample block | One piece | |
Charpy Impact Test | Pre-elevation angle | 150° |
Capacity | 1J，2J,4J,5J | |
Impact velocity | 2.9m/s | |
Pendulum center distance | 230mm | |
Support distance | 40mm、60m、70mm、95mm | |
Blade filleted radius | R=2mm±0.5mm | |
Impact blade angle | 30°±1° | |
Center sample block | One piece | |
Power | AC220V±10% 50/60HZ | |
