- 9.1kg and 10kg
- 0-1000mm (can be set)
- Impact method
- free fall
- Internal material
- SUS#304 stainless steel plate, thickness 1.2mm
- Control mode
- PLC touch screen control
- Displacement accuracy
The battery of the test sample shall be placed on a flat surface, and a rod with a diameter of 15.8 ± 0.2 mm (5/8 inch) shall be placed on the center of the sample in a crisscross pattern. A 9.1kg or 10kg weight dropped from a certain height (610mm or 1000mm) onto the sample. When a cylindrical or square battery is subjected to an impact test, its longitudinal axis should be parallel to the plane and perpendicular to the longitudinal axis of the steel column. The longest axis of the square battery is perpendicular to the steel column, and the largest surface is perpendicular to the impact direction. Each battery only accepts one impact test. If the battery does not catch fire, it is qualified if it does not explode.
UL1642: 2012, UL 2054 "Lithium Battery Standard"
UN38.3 "Lithium Batteries and Battery Pack Testing Standard Regulations"
IEC62133GB/T 18287-2013 "General Specification for Lithium Ion Batteries for Cellular Phones Heavy Object Impact Test"
GB 31241-2014 "Safety requirements for lithium-ion batteries and battery packs for portable electronic products"
GB-31241-2014 "Safety Requirements for Lithium Ion Batteries and Battery Packs for Portable Electronic Products"
QB/T2502 "General Specification for Lithium Ion Batteries"
9.1kg and 10kg;
0-1000mm (can be set);
LED meter display;
4. Displacement accuracy
5. Impact method
6. Control mode
PLC touch screen control;
7. Impact floor material
No. 45 steel, thickness 30 password;
8. Metal rod
15.8±0.2mm (5/8 inch) steel rod;
9. Internal material
SUS#304 stainless steel plate, thickness 1.2mm; Teflon melt adhesive tape is applied to 1/3 of the place, high temperature resistance, corrosion resistance, insulation and easy to clean.
10. External material
cold-rolled sheet baking varnish treatment, thickness 1.5mm;
11. Pressure relief door size
12. Smoke exhaust pipe
diameter φ100mm, located at the back of the box;
13. Box door
a single door opens to the left, and an explosion-proof chain is installed on the side of the box door;
14. The maximum size of the battery tested
200x200x200mm (width x depth x height);
15. Inside dimensions
490x520x1430mm (width x depth x height);
16. Outside Dimensions
700x1000x1720mm (width x depth x height, including door lock);
17. Impact method
lift the falling ball to a certain height and release it, and the falling ball falls freely in the vertical direction, without tilting or shaking;
18. Power supply
1∮, AC220V, 3A
19. Power supply power
20. Weight (approximately)