Three Zones Thermal Shock Test Chamber
Three Zones Thermal Shock Test Chamber
Three Zones Thermal Shock Test Chamber
Three Zones Thermal Shock Test Chamber
Model
HUD-E703 Thermal Shock Test Chamber

Item specifics

Internal material
SUS#304 stainless steel
Temperature range
-40 to +150℃(can be customized)
Test method
Pneumatic operated, two / three chambers
Pre-heat temp.range
Ambient to +170℃, ≤35min
Pre-cool temp.range
Ambient to -60℃, ≤60min
Temperature deviation
±3℃

Review

Description

Advantages
1 Customize
size,temperatute,vertical/horizontal type...
2 High-resolution 7.5 inch display
3 Rapid rate
Pre-heat temp.range:RT→170℃·≤35min
Pre-cool temp.range:RT→-60℃·≤40min Temp. recovery time:3~5min
4 Safety alarm functions
short-circuits,Leakage, over temperature,over pressure, over load, short water...it will alarm.
5 Complies with international safety standards
MTL, IEC, JIS, GJB...
6 Local services
We have local partners in India, Bangladesh, Pakistan, Turkey, Sri Lanka, Mexico, Iran...
APPLICATION
Thermal Shock Test Chamber is used to test the bearing extent of the material structures and composite material in an instant and continuous high temperature and extremely low temperature environment, which is in the shortest time to test its thermal expansion and contraction caused by chemical change or physical harm.
FEATURES
1 Perfect appearance and easy to operate.
2 Imported LCD English microcomputer temperature controller, with high memory capacity, can save 100 programs, max 9999 cycles, each cycle max time 999hrs.
3 High temperature chamber and low temperature chamber, control automatically, stay and switch time adjustable.
4 Perfect protection alarm functions: short-circuits, Leakage, over temperature of work chamber; compressor over pressure, over load, short water…
5 Control interface will display alarm reason and provide check methods, machine has emergency stop button.
6 Cold and hot shock temperature recover within1 minute, which complies with MTL, IEC, JIS, GJB and other international standards. 
MAIN PARAMETERS 

Item

Specification

Test method

Pneumatic operated, two / three chambers

Internal dimension

350*400*350

mm

(50L)

500*450*450

mm

(100L)

550*450*550

mm

(150L)

650*450*670

mm

(200L)

800*450*820

mm

(300L)

External dimension

1230x1830

x1270mm

1380x1980

x1370mm

1420x2000

x1400mm

1530x1980

x1590mm

1680x1980

x1735mm

Pre-heat temp.range

Ambient to +170, 35min

Pre-cool temp.range

Ambient to -60℃, 60min

Temperature range

-40 to +150(can be customized)

Temperature deviation

3~5℃

Lifting switch time

≤10 seconds

Test duration

>30mins in high temperature chamber / low temperature chamber

Test hole for cable routing

Diameter 50mm on the left of chamber attach a silicone plug

External chamber material

High quality electrolytic steel plate spray with powder, antirust

Internal material

SUS#304 stainless steel

Thermal insulation material

High quality superfine glass fiber

Refrigerant

R404A / R23

Cooling method

Water cooling

Power supply

Three phase, 380V, 50Hz


DETAILS

High temperature chamber:

1, Including three parts: heater, draught fan and air duct valve

2, Draught fan cyclically stirs hot air through heater

3, The basket with testing product drive to high temperature range when doing high temperature impact test.

 

Low temperature chamber:

1, Including four parts: evaporator, energy storage piece, draught fan and air duct valve

2, Draught fan cyclically stirs cold air through evaporator and energy storage piece.

3, The basket with testing product drive to low temperature range when doing low temperature impact test.

 

Drive device:

Pneumatic cylinder: drive basket with testing product to high and low temperature chamber

Air compressor: Provide the compressed air for driving pneumatic door (supplied by buyer)

 

Refrigerating device:

Cooling system: complex overlapping efficient cryogenic loop system

Compressor: Bock compressor

Refrigerant: environmental protection refrigerant R23/R404A

Condensation: Stainless steel welded plate heat exchanger

 

Controller:

Operate interface: PLC controller, touch screen

Program memory capacity: 100 groups

Setting range: Time: 1 minute ~ 99 hour 59 minute, cycles: 1~ 9999cycles

Resolution: temperature: 0.01 ℃

Input: T thermocouple

Control method: PID auto calculation control

 

Additional functions:

Timer, over temperature and power failure protection, alarm, record test curve, emergency stop, display test time

Standard configuration: indication lamp of test chamber, time meter, test hole for wire routing, 6pcs castor, 4pcs adjust wheel.

 

Safety device:

Power overload protection                                 

Leakage protection

Control circuit overload protection

Short-circuit protection

Compressor overload protection

Ground protection

Over temperature protection

Audible and visual alarm